Rough Country PERF905 4.0" X-Series Long Arm Suspension Lift Kit

Boasting some impressive features, the 4" Jeep Grand Cherokee ZJ Longarm Kit is a comprehensive package including everything needed for a great suspension lift while maintaining the vehicle's crucial center of gravity. The kit includes adjustable high-clearance X-Flex upper and lower control arms with Clevite bushings, featuring rebuildable X-Flex joints with Adjustable Retainer Rings allowing you to preload bushings by compressing them prior to install. This lift kit features high-clearance components with a front Y-link and rear 4-link control arm design. This promotes extreme axle flex while keeping pinion angles optimized.

Features:

• Aggressive appearance
• Increased ground clearance
• HD 1/4" thick crossmember
• Lower control arms feature high clearance design
• Extreme travel long arms keep optimum alignment and give optimum articulation.
• Clevite brand OEM style rubber bushings.
• Flex joints are fully rebuildable.
• Flex joints feature a massive 2.5" diameter body and 1.25" thread.
• Fully greasable.
• Adjustable retainer ring.
• Upper joints pivot up to 20 degrees.
• Lower joints pivot up to 35 degrees.

Notes:

• Does NOT fit AWD models.
• Transfer case skid plate will NOT fit models equipped with NP249 transfer case.
• Exhaust will have to be cut and rerouted to make sure it is away from the moving components.
• Models equipped with a CV style front driveshaft may result in driveshaft vibration. Replacing the driveshaft, axle yoke, and transfer case yoke will be REQUIRED.

??Kit Contains:

-- Front

• Lifted coil springs
• Adjustable upper control arms
• Adjustable lower control arms
• Crossmember
• Transfer case skid plate
• Sway-bar quick disconnects
• Adjustable track bar
• Track bar bracket
• 3" Bumpstops
• Hardware

-- Rear

• Lifted coil springs
• Adjustable upper control arms
• Adjustable lower control arms
• Long arm frame brackets
• Track bar bracket
• Bumpstop brackets
• Brake line brackets
• Hardware

-- Shocks

• (4) Performance 2.2 Series

Installation Time Estimated: 8-9 Hours

Wheels/Tires:

• 31x10.50 R15 Factory BS

Front: Coil springs, adjustable lower control arms, adjustable upper control arms, 1/2-inch thick crossmember, transfer case skid plate, quick disconnects, 3-inch bumpstops, forged adjustable track bar, track bar drop bracket, and hardware - Rear: Coil springs, adjustable lower control arms, adjustable upper control arms, frame brackets, track bar bracket, brake line and e-brake relocation bracket, bumpstop brackets, and hardware - Shocks: (4) Performance 2.2 Series; Transfer case skid plate does not fit models equipped with NP249 transfer case, Models equipped with CV style front drive shaft may result in drive shaft vibration - If this occurs, replacing the drive shaft, axle yoke, and/or transfer case yoke will need to be performed to rid the vehicle of driveline vibration, Exhaust will have to be cut and rerouted to make sure it is away from the moving components; Install Time (Hours): 8-9; Wheel Backspacing (Inches): 3.625, Recommended Tire Size: 31x10.50