Morimoto BAF132H BigBanger 2-Light LED Fog Light Wire Harness

Morimoto lighting was established in 2008 to fill the gap in the aftermarket for truly high quality automotive lighting products. Without the budget of a major automaker to back R&D & production, individual consumers could either salvage original equipment components, or be forced to settle for inferior aftermarket parts. If you are an enthusiast, a fabricator, or a distributor & have found yourself unimpressed w/the 'dime-a-dozen' HID kits & accessories from other manufactures, then we urge you to take a closer look at what we have to offer. Search the web for an alternative name in lighting that comes more widely recommended by end-users for performance, reliability, & the way it looks & if you can find it, then buy it. Morimoto is the automotive lighting benchmark.

Features:

• POWER UP: The Morimoto BigBanger LED Pods have been developed from the ground up to set a new standard in their segment, & the same goes for the wiring. This harness is designed to control the pods & their dual intensity backlight w/ease.
• OEM+: Not one component on the harness was overlooked for the sake of cost or simplicity. Triple sealed proprietary 4-pin relay w/hanger. Proprietary over-molded inline fuse holder w/20A mini fuse. DT06-4S female outputs w/dual seals. Stainless steel power & ground terminals. Proprietary M-Spec push button switch w/amber-LED backlight.
• PROPER: All wiring is properly sized & relays rated for flicker-free, reliable power delivery. Every line of the 16 awg copper wiring is protected w/black mesh insulation. Every connector has been over-molded, sealed, or protected w/heavy duty heat shrink. Your factory wire harness will fall apart before this thing.
• PLUG N PLAY: The connections on the harness have been laid out in a logical way to power a BigBanger LED pod on each side of your vehicle. There are two deutsch outputs. A positive battery terminal, a ground terminal, & a switch. The wiring for the in-cabin push button switch has an in-line barrel connector that drastically improves ease of installation, since you don't have to jam the switch mechanism through the firewall. The harness also includes an input line that's ideal for use w/upfitter switches.
• DRL DRIVE: The harness is designed to send power to the BigBanger backlight using an ignition-switched power source in your fuse box. To do so, the harness includes both a mini & micro fuse tap to ensure success regardless of your make/model. This will make the backlight run at full intensity. In order to dim the backlight for dusk or night time driving, the harness has a separate line that should be tapped into your parking light or low beam circuit.
• COMPATIBLE: This harness is a perfect match for the Morimoto BigBanger LED pods. It is purposely designed to deliver enough power, & control the dual intensity backlight. While it may work w/other 4-pin LED pods on the market, we have not designed it to be universal.

Whats Included:

• HARNESS: 1x Morimoto BigBanger 2-Pod Power Harness
• SWITCH 1: 1x M-spec Push Button Switch Kit
• SWITCH 2: Upfitter switch input adapter kit
• BACKLIGHT POWER KIT: Mini & Micro fuse inputs