BMR SB023R Sway Bar Kit W/ Bushings & Billet Links Rear Solid 22mm

Sway Bar Kit W/ Bushings & Billet Links, Rear, Solid 22mm
The two primary functions of sway bars are to control body roll & to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspensions SB023 rear sway bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, & adjustability requirements. Manufactured from heavy-duty 22mm bar stock, the SB023 is cold formed to better resist torsional fatigue & retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances & repeatable high quality. The SB023 attaches to your Mustang w/billet aluminum end links & 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, & are internally fluted to keep grease in the bushing. The CNC-machined, billet aluminum sway bar end links eliminate deflection.BMR Suspension designed the SB023 sway bar for street performance, autocross, & road race applications. The non-adjustable SB023 gives you a 52% increase in rate over the stock bar (depending on year & model). The rate increases gives you improved handling characteristics so you can drive harder through corners w/minimal body roll. This allows for more sway bar control, which equals better handling. When performance is a must, rely on BMR Suspension!BMR Suspensions SB023 sway bars are available in black hammertone & red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.!NOTE: BMR SB023 rear sway bar is not compatible w/convertible models unless the additional OE convertible bracing is removed.