MORRFlate Slide Valve Air Line Fitting; MF-SLIDE

Here at MORRFlate, we are always looking for ways or ideas to make our kits better. Ball valves are good, but we have had issues with people over rotating them, or rotating them the wrong way and breaking them. Or the levers give extra opportunity to catch on things and bend or break off. So we made the valve simpler, stronger, longer lasting, and more ergonomic by designing our own slide valves. The valve consists of a 1/4" Male NPT threads on one end, 1/4" Female NPT threads on the other end, and a 2 way valve in the middle that is opened and closed using the green collar. And, unlike any slide valves you can find off the shelf (or online marketplaces), this valve does not vent. Which makes it a perfect use for vehicle tire applications. To open the valve and let air pass through, simply push the green collar up towards the male end (or your manifold if the valve is already installed on your MORRFlate kit). To close the valve and keep air from flowing through, simply push the green collar towards the female end (away from your manifold if the valve is already installed on your MORRFlate).

Features

• 150 psi rated
• Open/close configuration. There is no venting
• To open the flow, push the green collar towards the male end
• To close the flow, push the green collar towards the female end