Metco Motorsports MFP0006 Fuel Block Kit w/Gauge for 99-04 Ford Mustang

This convenient billet adapter mounts directly to the factory (or aftermarket equivalent) fuel rail, sandwiched between the rail and the OEM fuel pressure sensor. The fuel block seals with OEM-style O-rings, so no gaskets or sealants are required. The installation is a quick and simple affair.

The block has one 1/8" NPT port on each side, providing a convenient tap for a fuel pressure gauge, a tap for a nitrous system, or both. A stainless steel pipe plug (not shown) is included to plug one port if the port is unused.

The kit includes the black-anodized CNC-machined fuel block, O-rings, one stainless steel 1/8" pipe plug, and stainless steel mounting hardware.

Notes:

• To confirm fitment on vehicles other than those listed, measure the distance between the two mounting bolts for your fuel pressure sensor. If your measurement is 2.094", this adapter will fit your fuel rail. If your measurement is 1.6", please see the MFF0004 adapter listed under the Fuel System Components tab. This adapter is approximately 3/4" thick, so the user should confirm that the necessary clearance exists above the pressure sensor before ordering.